Operating Manual

75
OPERATION
Use the 28 bar position for implements with long
hoses, for load sensing signal / or external
pressure supply (for example with manure vat).
NOTE:
In the 28 bar position, there are higher hy-
draulic losses, which cause the oil to heat up.
Front hydraulic connections
Operation_Pic_number:1
C = Red valve.
RF = Front return flow.
(black coding).
Fig.149
18. Electronic lifting
gear control, rear
18.1 Controls
Operating console, right side
Operation_Pic_number:1
G = Depth control
H = Quick Lift key
Vario terminal
Operation_Pic_number:1
A = Lift height
B = Lowering speed
C = Position/traction mix control
D = DA function active indicator
Fast feed-in
Hitch-lift
EPC automatic mode
(also refer to OPERATION
Section 14.1).
Fig.150
Fig.151