Operating Manual
Table Of Contents
- OPERATING MANUAL
- NUMERICAL INDEX
- SAFETY INSTRUCTIONS
- OPERATION
- 1. Driver seat
- 2. Display instruments and operating controls
- 3. Heating and ventilation
- 4. Rearwiew mirror
- 5. Start-up
- 6. Starting and stopping the engine
- 7. Vario transmission
- 8. Fuel consumption measurement
- 9. Tractor Management System (TMS)
- 10. PTO
- 11. Four wheel drive (4-WD)
- 12. Differential lock
- 13. Front axle suspension
- 14. Power lift and PTO automatic mode
- 15. Brakes
- 16. Steering
- 17. Hydraulics
- 18. Electronic lifting gear control, rear
- 19. Three-point link
- 20. Front power lift
- 21. Trailing devices
- 22. Compressed air system
- 23. Additional ballasting
- 24. Track adjustment
- 25. Twin tyres
- 26. On-board computer
- 27. Computer
- 28. Storing the settings
- 29. Implement control
- 30. Variotronic Ti
- CARE AND MAINTENANCE
- 1. General
- 2. Opening the bonnet
- 3. Engine oil change
- 4. Fuel system
- 5. Dry air .lter
- 6. Cooling system
- 7. V belt
- 8. Brake and clutch system
- 9. Front PTO
- 10. Transmission and axle drives
- 11. Four-wheel drive axle
- 12. Power lift
- 13. Hydraulic system
- 14. Steering
- 15. Front wheels
- 16. Heating and ventilation
- 17. Air conditioning
- 18. Windshield washer system
- 19. Cleaning the tractor
- 20. Electrical and electronic systems
- 21. Fuses
- 22. Wiring diagrams
- IMPLEMENTS
- FAULTS AND REMEDIAL ACTIONS
- TECHNICAL DATA
- ALPHABETICAL INDEX
- Important information on service and maintenance
63
OPERATION
15. Brakes
15.1 Foot brake
Operation_Pic_number:1
Operation_Pic_number:1
● For independent wheel braking (steering
clutch brake), unlock the brake pedals.
● Press the pedal for the inner wheel.
NOTE:
Use the steering clutch brake only at low
speeds, and never jerk it; do not use with the
differential lock engaged.
DANGER:
Before each trip, always check the
brakes.
DANGER:
On normal roads, and when pulling
trailers equipped with air brakes,
lock the brake pedals together
(independent wheel braking is not
permitted).
Fig.107
Fig.108
15.2 Hand brake
Hand brake
Operation_Pic_number:1
Text-module
When the hand brake (A) is applied, the trans-
mission is automatically shifted to neutral posi-
tion, if speed goes under 2 km/h within 2 secs..
Displays when in neutral position
Operation_Pic_number:1
Text-module
ETNum-list
Text-module
● When the parking brake is activated, the neu-
tral position can be cancelled with the neutral
button (N) (Starting assistance).
If the hand brake is not released within 30 se-
conds, or the speed is not above 2 km/h, the
transmission returns to neutral.
DANGER:
When parking the tractor, always
immobilise with the hand brake; on
slopes, also place chocks at the
wheels.
1.LED (N1) lights up.
2.Direction of travel indicator lamps (C) are
flashing.
3.Clock and operating hours (D) are shown on
the multiple display.
Fig.109
Fig.110