Operating Manual

41
OPERATION
Driving off using the turboclutch
function
● Setting the engine idle speed.
● Apply the brake.
● Press activating button and use the joystick to
select the desired direction of travel.
● Release the brake and start off by accelera-
ting slightly.
● Use the joystick to obtain the desired ground
speed.
NOTE:
Avoid stopping for long periods (>1 min.) with
the turboclutch on.
When operating with sustained load, do not
allow the engine speed to drop below
1,250 rpm.
Do not operate the clutch pedal for long pe-
riods.
Text-module
Stopping and starting on slopes
● Move joystick against the actual travel direc-
tion.
The tractor slows down until it comes to a stand-
still. 'Active' symbol flashes.
NOTE:
Below an engine speed of 1,250 rpm, depen-
ding on load, turbo clutch function will allow
transmission slip.
Text-module
Clutch pedal
For connecting implements, the tractor can be
controlled for gradual movements with the clutch
pedal.
In sudden emergencies, the tractor can be stop-
ped by pressing the clutch and brake pedals.
Text-module
Final speed control
Final speed is a cruise control function which
compensates for variations in engine speed.
T = Theoretical final speed
E = Switch-on speed
A = Cut-out speed
ETNum-list
TEA
about 33 km/h 32.5 km/h 31 km/h
about 44 km/h 43.5 km/h 42 km/h
about 51 km/h 50.5 km/h 49 km/h
The speed control is terminated by operating
any of the following:
1.Joystick
2.Brake pedals (including independent wheel
brake)
3.Engine brake pedal
4.Clutch pedal