Operating Manual
Table Of Contents
- OPERATING MANUAL
- NUMERICAL INDEX
- SAFETY INSTRUCTIONS
- OPERATION
- 1. Driver seat
- 2. Display instruments and operating controls
- 3. Heating and ventilation
- 4. Rearwiew mirror
- 5. Start-up
- 6. Starting and stopping the engine
- 7. Vario transmission
- 8. Fuel consumption measurement
- 9. Tractor Management System (TMS)
- 10. PTO
- 11. Four wheel drive (4-WD)
- 12. Differential lock
- 13. Front axle suspension
- 14. Power lift and PTO automatic mode
- 15. Brakes
- 16. Steering
- 17. Hydraulics
- 18. Electronic lifting gear control, rear
- 19. Three-point link
- 20. Front power lift
- 21. Trailing devices
- 22. Compressed air system
- 23. Additional ballasting
- 24. Track adjustment
- 25. Twin tyres
- 26. On-board computer
- 27. Computer
- 28. Storing the settings
- 29. Implement control
- 30. Variotronic Ti
- CARE AND MAINTENANCE
- 1. General
- 2. Opening the bonnet
- 3. Engine oil change
- 4. Fuel system
- 5. Dry air .lter
- 6. Cooling system
- 7. V belt
- 8. Brake and clutch system
- 9. Front PTO
- 10. Transmission and axle drives
- 11. Four-wheel drive axle
- 12. Power lift
- 13. Hydraulic system
- 14. Steering
- 15. Front wheels
- 16. Heating and ventilation
- 17. Air conditioning
- 18. Windshield washer system
- 19. Cleaning the tractor
- 20. Electrical and electronic systems
- 21. Fuses
- 22. Wiring diagrams
- IMPLEMENTS
- FAULTS AND REMEDIAL ACTIONS
- TECHNICAL DATA
- ALPHABETICAL INDEX
- Important information on service and maintenance
255
TECHNICAL DATA
5. Lubrication chart
5.1 Filling points
Text-module
Engine:
turn dipstick (B) and
remove, fill with
engine oil (A).
Transmission:
Turn dipstick (A) and
remove, fill with
transmission oil.
Axle drives, each
side:
Pour in oil through
filler hole (B).
Front axle
differential gear:
Fill up to overflow at
filler hole (A).
Front axle hub
drives:
fill until the oil spills
over, with hole on
the left and marker
in horizontal
position.
Front PTO:
Fill up to overflow at
filler hole (A).
Lift shaft:
fill until oil is approx.
40 mm below filler
hole (A).
Hydraulic system:
Unscrew filter cover
(A). Fill with oil.
Brake and clutch
system:
Fill container
(arrowed) with
Pentosin CHF 11S.
Cooling system:
Pour clean, low-lime
water containing
anti-freeze into con-
tainer (arrowed).
Windshield washer
system:
Pour fluid into
container (A).
Compressed-air
system:
Fill antifreeze
container (B) with
ethyl alcohol.
Fuel tank:
fill with fuel through
filler neck (A).