Operating Manual

251
TECHNICAL DATA
2. Tyre pressures
Text-module
Tyre pressure front
1.6 bar.
Text-module
Tyre pressure rear
1.6 bar.
Text-module
CAUTION:
Check tyre pressures regularly!
Comply with tyre manufacturer’s recommen-
dations.
● Pressures may differ according to tractor mo-
del, make of tyre and type of operation e.g.
front loader operation.
● For max. traction and min. ground pressure in
the field, adapt tyre pressures to axle load.
● According to German vehicle licensing regu-
lations, if tyres bring the vehicle width to 2.5 m
- 3.0 m (wide tyres), the maximum tyre pres-
sure is 1.5 bar.
● Tyre load capacity is designated by a 'service
description' with a load capacity identifier, e.g.
145 = 2,900 kg basic load capacity per tyre,
and a speed symbol, e.g. A8 = 40 km/h refe-
rence speed.
● If 40 km/h tyre is used at 50 km/h, the basic
load capacity is reduced by 9 %.
● Do not operate maintenance wheels above a
maximum speed of 40 km/h.
● Increase the tyre pressure when operating
the front loader.