Operating Manual
Table Of Contents
- OPERATING MANUAL
- NUMERICAL INDEX
- SAFETY INSTRUCTIONS
- OPERATION
- 1. Driver seat
- 2. Display instruments and operating controls
- 3. Heating and ventilation
- 4. Rearwiew mirror
- 5. Start-up
- 6. Starting and stopping the engine
- 7. Vario transmission
- 8. Fuel consumption measurement
- 9. Tractor Management System (TMS)
- 10. PTO
- 11. Four wheel drive (4-WD)
- 12. Differential lock
- 13. Front axle suspension
- 14. Power lift and PTO automatic mode
- 15. Brakes
- 16. Steering
- 17. Hydraulics
- 18. Electronic lifting gear control, rear
- 19. Three-point link
- 20. Front power lift
- 21. Trailing devices
- 22. Compressed air system
- 23. Additional ballasting
- 24. Track adjustment
- 25. Twin tyres
- 26. On-board computer
- 27. Computer
- 28. Storing the settings
- 29. Implement control
- 30. Variotronic Ti
- CARE AND MAINTENANCE
- 1. General
- 2. Opening the bonnet
- 3. Engine oil change
- 4. Fuel system
- 5. Dry air .lter
- 6. Cooling system
- 7. V belt
- 8. Brake and clutch system
- 9. Front PTO
- 10. Transmission and axle drives
- 11. Four-wheel drive axle
- 12. Power lift
- 13. Hydraulic system
- 14. Steering
- 15. Front wheels
- 16. Heating and ventilation
- 17. Air conditioning
- 18. Windshield washer system
- 19. Cleaning the tractor
- 20. Electrical and electronic systems
- 21. Fuses
- 22. Wiring diagrams
- IMPLEMENTS
- FAULTS AND REMEDIAL ACTIONS
- TECHNICAL DATA
- ALPHABETICAL INDEX
- Important information on service and maintenance
244
FAULTS AND REMEDIAL ACTIONS
Variotronic Ti
Fault code Cause Effect and remedy
B.1.11 Electrical fault, automatic
mode.
Call workshop.
B.1.12 Electrical fault, terminal. Call workshop.
B.1.21 Communications error, internal
communication.
Call workshop.
B.1.22 Communications error between
terminal and Variotronic Ti.
Call workshop.
B.1.23 Communications error between
control console and Variotronic
Ti.
Call workshop.
B.1.24 Communications error between
joystick and Variotronic Ti.
Call workshop.
B.1.41 Communications error, internal
communication.
Call workshop.
B.1.42 Communications error between
terminal and Variotronic Ti.
Call workshop.
B.1.43 Communications error between
control console and Variotronic
Ti.
Call workshop.
B.1.44 Error counter between joystick
and Variotronic Ti.
Call workshop.
B.1.BO Error reader Variotronic Ti. Call workshop.
B.1.B4 Error in the memory function. Restart tractor. If error is still there, con-
sult workshop.