Operating Manual
Table Of Contents
- OPERATING MANUAL
- NUMERICAL INDEX
- SAFETY INSTRUCTIONS
- OPERATION
- 1. Driver seat
- 2. Display instruments and operating controls
- 3. Heating and ventilation
- 4. Rearwiew mirror
- 5. Start-up
- 6. Starting and stopping the engine
- 7. Vario transmission
- 8. Fuel consumption measurement
- 9. Tractor Management System (TMS)
- 10. PTO
- 11. Four wheel drive (4-WD)
- 12. Differential lock
- 13. Front axle suspension
- 14. Power lift and PTO automatic mode
- 15. Brakes
- 16. Steering
- 17. Hydraulics
- 18. Electronic lifting gear control, rear
- 19. Three-point link
- 20. Front power lift
- 21. Trailing devices
- 22. Compressed air system
- 23. Additional ballasting
- 24. Track adjustment
- 25. Twin tyres
- 26. On-board computer
- 27. Computer
- 28. Storing the settings
- 29. Implement control
- 30. Variotronic Ti
- CARE AND MAINTENANCE
- 1. General
- 2. Opening the bonnet
- 3. Engine oil change
- 4. Fuel system
- 5. Dry air .lter
- 6. Cooling system
- 7. V belt
- 8. Brake and clutch system
- 9. Front PTO
- 10. Transmission and axle drives
- 11. Four-wheel drive axle
- 12. Power lift
- 13. Hydraulic system
- 14. Steering
- 15. Front wheels
- 16. Heating and ventilation
- 17. Air conditioning
- 18. Windshield washer system
- 19. Cleaning the tractor
- 20. Electrical and electronic systems
- 21. Fuses
- 22. Wiring diagrams
- IMPLEMENTS
- FAULTS AND REMEDIAL ACTIONS
- TECHNICAL DATA
- ALPHABETICAL INDEX
- Important information on service and maintenance
240
FAULTS AND REMEDIAL ACTIONS
Electric valves (oeprating console)
Text-module
Electric valves (crossgate lever)
Text-module
Electric valves (buttons / switches)
Fault code Cause Effect and remedy
A.1.C0 Control console not available,
e.g. CAN-bus not connected.
No automatic mode. No general locking
of valves.
A.1.C1 Automatic mode button faulty. No automatic mode.
A.1.C2 Overall locking key faulty. No overall locking of valves.
A.1.C3 Floating position button faulty. No floating position.
A.1.C4 Timer function button faulty. No timer function.
A.1.C5 Crossgate lever/joystick swit-
chover button faulty.
Not possible to switch between crossgate
lever operation and joystick operation.
A.1.C6 Operating console CAN bus
faulty.
Change of status not detected. Switching
on/off is ignored. Valve locked.
A 1.C7
A.1.C8
A.1.C9
A.1.CA
A.1.CB CAN joystick not available. Not possible to operate valves.
A.1.CC E-Box and CAN joystick CAN
connection faulty.
Limited operation of valves.
Fault code Cause Effect and remedy
A.1.B0 Crossgate lever not adjusted. Valves cannot be actuated. Carry out ad-
justment.
A.1.B1 Signal fault. Valve position cannot be controlled pro-
perly.
A.1.B2
A.1.B3
A.1.B4
A.1.B5 Crossgate lever recognition of
centre position faulty.
Valve position cannot be operated accu-
rately. Calibrate.
Fault code Cause Effect and remedy
A.1.FA External valve actuation. Spool
valve external pushbutton for
rear LIFT faulty.
Rear external controls not working.
A.1.FB External valve actuation. Spool
valve external pushbutton for
rear LOWER faulty.
Rear external controls not working.
A.1.FC External valve actuation. Spool
valve external pushbutton rear
actuates twice or pushbutton is
faulty.
Change controls or exchange keys.
A.1.D1 Valve 3, signal disturbed or
faulty valve.
'Lift' and/or 'Lower' valve 3 faulty.
A.1.D3 Valve 4, signal disturbed or
faulty valve.
'Lift' and/or 'Lower' valve 4 faulty.
A.1.D4 Faulty solenoid switch for re-
lease of external controls of
standard front power lift.
Position of shutoff cock for front power lift
cannot be detected.
A.1.D5 External front power lift 'Lower'
button faulty.
Front power lift cannot be lowered pro-
perly.