Operating Manual
Table Of Contents
- OPERATING MANUAL
- NUMERICAL INDEX
- SAFETY INSTRUCTIONS
- OPERATION
- 1. Driver seat
- 2. Display instruments and operating controls
- 3. Heating and ventilation
- 4. Rearwiew mirror
- 5. Start-up
- 6. Starting and stopping the engine
- 7. Vario transmission
- 8. Fuel consumption measurement
- 9. Tractor Management System (TMS)
- 10. PTO
- 11. Four wheel drive (4-WD)
- 12. Differential lock
- 13. Front axle suspension
- 14. Power lift and PTO automatic mode
- 15. Brakes
- 16. Steering
- 17. Hydraulics
- 18. Electronic lifting gear control, rear
- 19. Three-point link
- 20. Front power lift
- 21. Trailing devices
- 22. Compressed air system
- 23. Additional ballasting
- 24. Track adjustment
- 25. Twin tyres
- 26. On-board computer
- 27. Computer
- 28. Storing the settings
- 29. Implement control
- 30. Variotronic Ti
- CARE AND MAINTENANCE
- 1. General
- 2. Opening the bonnet
- 3. Engine oil change
- 4. Fuel system
- 5. Dry air .lter
- 6. Cooling system
- 7. V belt
- 8. Brake and clutch system
- 9. Front PTO
- 10. Transmission and axle drives
- 11. Four-wheel drive axle
- 12. Power lift
- 13. Hydraulic system
- 14. Steering
- 15. Front wheels
- 16. Heating and ventilation
- 17. Air conditioning
- 18. Windshield washer system
- 19. Cleaning the tractor
- 20. Electrical and electronic systems
- 21. Fuses
- 22. Wiring diagrams
- IMPLEMENTS
- FAULTS AND REMEDIAL ACTIONS
- TECHNICAL DATA
- ALPHABETICAL INDEX
- Important information on service and maintenance
24
OPERATION
Second main menu
Operation_Pic_number:1
Text-module
Pressing keys (F1 - F5) gives access to the follo-
wing functions.
F1 = On-board computer
F2 = Store terminal settings
F3 = Implement control
F4 = Variotronic Ti
F5 = Switch to third menu
Press the ESC key
● Display returns to first main menu.
Fig.16
Third main menu
Operation_Pic_number:1
Text-module
Pressing keys (F1 - F5) gives access to the follo-
wing functions.
F1 = Camera image (optional).
F2 = Camera image mirrored (optional).
F3 = Quick Jump
F4 = Terminal settings
F5 = Switch to first main menu
Text-module
Settings can be made with the 3 rotary controls
(P1, P2, P3) or
a preset menu page (Quick Jump) can be selec-
ted.
Text-module
Press the ESC key
● Display returns to first main menu.
The right rotary control for the
settings is displayed in the Vario
terminal.
Fig.17