Operating Manual

151
CARE AND MAINTENANCE
10.3 Changing the oil in the axle
drives
Operation_Pic_number:1
● Place an oil drip pan underneath the trans-
mission.
● Unscrew drain plug (A), remove and allow oil
to drain completely.
● Clean the drain plugs, re-insert and tighten.
● Pour in the required oil through filler hole (B)
on the left and the right axle carrier.
Oil level must be up to overflow at filler hole (B).
Fig.36
11. Four-wheel drive
axle
11.1 Changing the oil in the
front axle differential gear
Draining the oil
Operation_Pic_number:1
● Place an oil drip pan underneath the trans-
mission.
● Unscrew drain plug (A), remove and allow oil
to drain completely.
● Clean the drain plug, refit and tighten.
Filling with oil
Operation_Pic_number:1
● Pour in the required oil through filler hole (A).
Oil level must reach the overflow at filler hole (A).
Fig.37
Fig.38