Operating Manual
Table Of Contents
- OPERATING MANUAL
- NUMERICAL INDEX
- SAFETY INSTRUCTIONS
- OPERATION
- 1. Driver seat
- 2. Display instruments and operating controls
- 3. Heating and ventilation
- 4. Rearwiew mirror
- 5. Start-up
- 6. Starting and stopping the engine
- 7. Vario transmission
- 8. Fuel consumption measurement
- 9. Tractor Management System (TMS)
- 10. PTO
- 11. Four wheel drive (4-WD)
- 12. Differential lock
- 13. Front axle suspension
- 14. Power lift and PTO automatic mode
- 15. Brakes
- 16. Steering
- 17. Hydraulics
- 18. Electronic lifting gear control, rear
- 19. Three-point link
- 20. Front power lift
- 21. Trailing devices
- 22. Compressed air system
- 23. Additional ballasting
- 24. Track adjustment
- 25. Twin tyres
- 26. On-board computer
- 27. Computer
- 28. Storing the settings
- 29. Implement control
- 30. Variotronic Ti
- CARE AND MAINTENANCE
- 1. General
- 2. Opening the bonnet
- 3. Engine oil change
- 4. Fuel system
- 5. Dry air .lter
- 6. Cooling system
- 7. V belt
- 8. Brake and clutch system
- 9. Front PTO
- 10. Transmission and axle drives
- 11. Four-wheel drive axle
- 12. Power lift
- 13. Hydraulic system
- 14. Steering
- 15. Front wheels
- 16. Heating and ventilation
- 17. Air conditioning
- 18. Windshield washer system
- 19. Cleaning the tractor
- 20. Electrical and electronic systems
- 21. Fuses
- 22. Wiring diagrams
- IMPLEMENTS
- FAULTS AND REMEDIAL ACTIONS
- TECHNICAL DATA
- ALPHABETICAL INDEX
- Important information on service and maintenance
132
OPERATION
Play menu level
Operation_Pic_number:1
● Indicator (A) for operation with joystick button
(after the selected joystick button is pressed,
playback starts immediately).
● Indicator (B) for rear lifting gear.
● Indicator (C) for rear PTO.
● Indicator (D) for relative factor for the rear
PTO / rear lifting gear lift height.
Playback
Operation_Pic_number:1
Press button (A)
● Rear lifting gear is lowered, the rear PTO is
engaged at the selected lift height.
Press button (B)
● Rear lifting gear is lifted, the rear PTO is dis-
engaged at the selected lift height.
Press button (C)
● STOP.
Fig.326
Fig.327
PAUSE
Operation_Pic_number:1
● Hold key (A) pressed down during an opera-
tional sequence. The Pause symbol (B) appe-
ars.
● Release button (A), Pause mode is ended
and the next function is performed immedia-
tely.
● Press button (C) to abort an operating se-
quence.
NOTE:
The changes are not saved.
Fig.328