Operating Manual
Table Of Contents
- OPERATING MANUAL
- NUMERICAL INDEX
- SAFETY INSTRUCTIONS
- OPERATION
- 1. Driver seat
- 2. Display instruments and operating controls
- 3. Heating and ventilation
- 4. Rearwiew mirror
- 5. Start-up
- 6. Starting and stopping the engine
- 7. Vario transmission
- 8. Fuel consumption measurement
- 9. Tractor Management System (TMS)
- 10. PTO
- 11. Four wheel drive (4-WD)
- 12. Differential lock
- 13. Front axle suspension
- 14. Power lift and PTO automatic mode
- 15. Brakes
- 16. Steering
- 17. Hydraulics
- 18. Electronic lifting gear control, rear
- 19. Three-point link
- 20. Front power lift
- 21. Trailing devices
- 22. Compressed air system
- 23. Additional ballasting
- 24. Track adjustment
- 25. Twin tyres
- 26. On-board computer
- 27. Computer
- 28. Storing the settings
- 29. Implement control
- 30. Variotronic Ti
- CARE AND MAINTENANCE
- 1. General
- 2. Opening the bonnet
- 3. Engine oil change
- 4. Fuel system
- 5. Dry air .lter
- 6. Cooling system
- 7. V belt
- 8. Brake and clutch system
- 9. Front PTO
- 10. Transmission and axle drives
- 11. Four-wheel drive axle
- 12. Power lift
- 13. Hydraulic system
- 14. Steering
- 15. Front wheels
- 16. Heating and ventilation
- 17. Air conditioning
- 18. Windshield washer system
- 19. Cleaning the tractor
- 20. Electrical and electronic systems
- 21. Fuses
- 22. Wiring diagrams
- IMPLEMENTS
- FAULTS AND REMEDIAL ACTIONS
- TECHNICAL DATA
- ALPHABETICAL INDEX
- Important information on service and maintenance
129
OPERATION
30.4 Operating
NOTE:
If travelling at more than 25 km/h, playback
(Play) is not possible.
Recording of an operational sequence bet-
ween two activations is limited to 120 se-
conds and/or 300 metres.
If recording is interrupted for longer than
2 minutes, recording is discarded.
The direction of travel selected for the recor-
ding must correspond with the direction of
travel selected when playing back. Travelling
forward and being stopped are considered
the same.
If the playback of a recording is required in
the other direction of travel. Record with
(Edit), see OPERATION Section 30.8, start,
drive in other direction, new direction of tra-
vel is saved.
Text-module
Operation_Pic_number:1
● Press key (F5). The following sub-menu ap-
pears.
Operation_Pic_number:1
● Press key (F4). The following sub-menu ap-
pears.
Fig.313
Fig.314
Record menu level
Operation_Pic_number:1
or
Play menu level
Operation_Pic_number:1
Text-module
To record operational sequence.
Up to 13 functions can be put together to form an
operational sequence.
In the next example:
● Automatic function power lift and PTO.
The rear power lift is lowered, the rear PTO is
engaged at a selected lift height of the rear
power lift. The rear power lift is lifted, the PTO is
disengaged at a selected lifting height of the rear
power lift.
Press key (F2)
Change to menu level Record.
Fig.315
Fig.316