Operating Manual

124
OPERATION
29.4 Operating the implement
with the joystick
Operation_Pic_number:1
Text-module
● Assign joystick with the F1- F4 keys.
● To change the control button assignment,
press the F5 key.
NOTE:
The following sub-menu appears only for ISO
implements for which the control button as-
signment can be changed.
Operation_Pic_number:1
A = Connected implement, e.g. hay wagon.
B = Function of the connected implement,
e.g. lower pickup, lift pickup, lower draw-
bar.......
Text-module
Text-module
The button which is to trigger a
function is selected with the rotary
control (P2).
Browsing forward in the selection
menu is also possible with the
rotary control (P3).
Browsing backward in the selection
menu is also possible with the
rotary control (P3).
Fig.305
Fig.306
Text-module
Text-module
Text-module
NOTE:
Go back to the previous function level with
the ESC key, without saving.
Automatic assignment
Operation_Pic_number:1
1 - 10 = First, second........ function on the imple-
ment.
NOTE:
For the operation of implements with the con-
trol terminal, consult the implement manufac-
turer's operating manual.
Automatic assignment of
implement functions to a joystick
control button (see OPERATION
Fig. 307).
No joystick control button
assignment, set new assignment.
Go back to previous selection
page, with saving the control
functions.
Fig.307