Operating Manual
Table Of Contents
- OPERATING MANUAL
- NUMERICAL INDEX
- SAFETY INSTRUCTIONS
- OPERATION
- 1. Driver seat
- 2. Display instruments and operating controls
- 3. Heating and ventilation
- 4. Rearwiew mirror
- 5. Start-up
- 6. Starting and stopping the engine
- 7. Vario transmission
- 8. Fuel consumption measurement
- 9. Tractor Management System (TMS)
- 10. PTO
- 11. Four wheel drive (4-WD)
- 12. Differential lock
- 13. Front axle suspension
- 14. Power lift and PTO automatic mode
- 15. Brakes
- 16. Steering
- 17. Hydraulics
- 18. Electronic lifting gear control, rear
- 19. Three-point link
- 20. Front power lift
- 21. Trailing devices
- 22. Compressed air system
- 23. Additional ballasting
- 24. Track adjustment
- 25. Twin tyres
- 26. On-board computer
- 27. Computer
- 28. Storing the settings
- 29. Implement control
- 30. Variotronic Ti
- CARE AND MAINTENANCE
- 1. General
- 2. Opening the bonnet
- 3. Engine oil change
- 4. Fuel system
- 5. Dry air .lter
- 6. Cooling system
- 7. V belt
- 8. Brake and clutch system
- 9. Front PTO
- 10. Transmission and axle drives
- 11. Four-wheel drive axle
- 12. Power lift
- 13. Hydraulic system
- 14. Steering
- 15. Front wheels
- 16. Heating and ventilation
- 17. Air conditioning
- 18. Windshield washer system
- 19. Cleaning the tractor
- 20. Electrical and electronic systems
- 21. Fuses
- 22. Wiring diagrams
- IMPLEMENTS
- FAULTS AND REMEDIAL ACTIONS
- TECHNICAL DATA
- ALPHABETICAL INDEX
- Important information on service and maintenance
114
OPERATION
27. Computer
27.1 Computer functions
Operation_Pic_number:1
Operation_Pic_number:1
● Connect external counter plug in blue socket
(D).
Text-module
The individual measuring/counting process can
be made subject to a certain condition, as fol-
lows:
Measurement or counting only conducted if:
ETNum-list
Fuel consumption
Distance measurement
Area measurement
Stop watch
External counter
The signal from the on-board computer is
passed through an external counting sensor
(e.g. on baler, sprayer).
1.PTO (rear/front) is activated.
2.lifting gear (rear/front) is lowered.
3.external counter switch closed.
Fig.269
Fig.270
27.2 Select main menu
Operation_Pic_number:1
Text-module
Symbol (A) shows whether one or several com-
puters are activated in background.
Text-module
● Press key (F5). The following sub-menu ap-
pears.
Operation_Pic_number:1
Text-module
● Press key (F1). The following submenu appe-
ars.
Operation_Pic_number:1
The main menu shows the measured and
counted data.
NOTE:
Press ESC to return to previous menu level.
Fig.271
Fig.272
Fig.273