User Manual

FENDT 400 Vario COM III, FENDT 700 Vario COM III, FENDT 800 Vario COM III Faults
B
OVERALL SYSTEM/TRACTOR
Fault code table COM III
400 .. 1001- 724 .. 1001- 731 .. 1001- 401 .. 1001- 725 .. 1001- 402 .. 1001- 726 .. 1001- 403 .. 1001- 727 .. 1001- 404 .. 1001- 729 .. 1001-
0000 B T000434
Version 1
20/09/2007
14
Crop_this_page
1. 2 . D B A051 - ECU, engine control unit
(EDC 7).
Faulty serial communication
interface
SERDIA (delete error)
FC:00EB
2.1.E0 A002 - ECU, enhanced control
A034 - Driving switch, CAN bus
CAN communication be-
tween A002 and A034 faulty
Emergency opera-
tion -- check en-
hanced control bus
(Chapter 9000 Reg.E)
JOYSTICK
CAN - JOYSTICK
2.1.EE ISO/LBS mounted implement ISO/LBS job computer failed Mounted implement
can no longer be op-
erated via joystick
controls or terminal.
For fault description,
please refer to im-
plement manufac-
turer's
documentation
2.1.EF ISO/LBS mounted implement ISO/LBS job computer failed Restricted operation
of mounted imple-
ment, depending on
manufacturer
For fault description,
please refer to im-
plement manufac-
turer's
documentation
3.1.01 A004 - ECU, control panel Internal RAM, EEPROM faults Functions switched
off:
– Keypad, - digital /
analogue inputs,
– LED actuation
Replace control pan-
el
3.1.02 A004 - ECU, control panel Internal RAM, EEPROM faults Functions switched
off:
– Keypad, - digital /
analogue inputs,
- LED actuation
Replace control pan-
el
3.1.03 A004 - ECU, control panel Internal RAM, EEPROM faults Functions switched
off:
– Keypad, - digital /
analogue inputs,
- LED actuation
Replace control pan-
el
Fault
code
DIN brief description Cause Consequences Reference FENDIAS / Note