User Manual

all Vario tractors
Tractor / General system
Vario Tractors - Fault Codes
B
Faults
12/1999
0000 000001
B
f
58/58
Capitel Docu-No.Index
Date Version
Page
Vario Tractors - Fault Codes
B.1.B0 A002 ECU, enhanced control Read error during
Teach-in (program run)
Teach-in does not
function
See also Chapter 9700
Reg. A - Principle of
Variotronic TI operation
('Teach-in')
ENHANCED CONTROL
TeachIn
B.1.B4 A002 ECU, enhanced control Teach-in error - working
storage function
Teach-in does not
function --- Switch
ignition OFF then ON, if
error occurs again
--> load new band edge
programming in ECU
Enhanced Control; if
error occurs again
--> replace ECU
Enhanced Control
ENHANCED CONTROL
TeachIn
F.1.00 A034 Joystick Initialisation error in
reading EEPROM
Check A034 - drive
switch with FENDIAS
diagnostics program
Run new EOL
programming
(A034 - joystick)
F.1.B0 A034 Joystick Routing data GD false Run new EOL
programming
(A034 - joystick)
F.1.F0 A034 Joystick Diagnosis / filter data
checksum error
Run new EOL
programming
(A034 - joystick)
F.1.FF A034 Joystick Byte address checksum
error
Run new EOL
programming
(A034 - joystick)
Fault
code
Id code Brief description Description Consequences Link FENDIAS / Note