User Manual

all Vario tractors
Tractor / General system
Vario Tractors - Fault Codes
B
Faults
12/1999
0000 000001
B
f
47/58
Capitel Docu-No.
Index
Date Version
Page
Vario Tractors - Fault Codes
9.3.17 Battery Supply voltage >18 volt Control locked Service Training EPC C
(X 990.005.023.026en)
9.3.21 Rotary control for
'position/traction hybrid
control' for front EPC
Signal fault Service Training EPC C
(X 990.005.023.026en)
9.3.22 Front EPC rotary
position sensor
Signal fault Control locked Service Training EPC C
(X 990.005.023.026en)
9.3.23 Front EPC 'Depth
control' setpoint setting
Signal line fault Control locked Service Training EPC C
(X 990.005.023.026en)
9.3.24 Front power lift 'lift
height limit' rotary
control
Signal fault Control locked Service Training EPC C
(X 990.005.023.026en)
9.3.26 External position sensor
for front power lift
Signal line fault Control locked Service Training EPC C
(X 990.005.023.026en)
9.3.28 Quick lift switch, front Fault in front EPC quick
lift switch
'Raise' and 'Lower' only
possible via external
buttons.
Service Training EPC C
(X 990.005.023.026en)
9.3.34 Front power lift
'Lowering speed' rotary
control
Signal fault Cannot be changed Service Training EPC C
(X 990.005.023.026en)
A.1.10 Y015 Spool valve fault, valve 1 Valve cannot be
recognised by valve bus
No valve operation
available
Signal flow diagram
A002 CAN II pin 4 and 5
A.1.11 Y015 Spool valve fault, valve 1 EEPROM inconsistent Valve moves into neutral
position
A.1.12 Y015 Spool valve fault, valve 1 Supply voltage < 8 volts Valve moves into neutral
position
A.1.13 Y015 Spool valve fault, valve 1 Supply voltage
> 18 volts
Valve moves into neutral
position
Fault
code
Id code Brief description Description Consequences Link FENDIAS / Note