User Manual

all Vario tractors
Tractor / General system
Vario Tractors - Fault Codes
B
Faults
12/1999
0000 000001
B
f
44/58
Capitel Docu-No.Index
Date Version
Page
Vario Tractors - Fault Codes
9.1.51 Y019 Spool valve fault EEPROM inconsistent Valve moves into neutral
position
FRONT POWER LIFT /
VENDI
9.1.52 Spool valve fault Supply voltage > 8 volts Valve moves into neutral
position
FRONT POWER LIFT /
VENDI
9.1.53 Y019 Spool valve fault Supply voltage
> 18 volts
Valve moves into neutral
position
FRONT POWER LIFT /
VENDI
9.1.54 Y019 Spool valve fault Main piston travel too
short due to drop of
control pressure below
22 bar
Valve moves into neutral
position
Test control pressure
M5, test diaphragm
accumulator,
test RV7/ FP
FRONT POWER LIFT /
VENDI
Hydraulic oil
temperature too low
9.1.55 Y019 Spool valve fault Overvoltage (> 45 volts) Valve moves into neutral
position
9.1.56 Y019 Spool valve fault Magnet output stage
fault within spool valve
Valve moves into neutral
position
FRONT POWER LIFT /
VENDI
9.1.57 Y019 Spool valve fault Internal position sensor
fault
Valve moves into neutral
position
FRONT POWER LIFT /
VENDI
9.1.58 Y019 Spool valve fault Main piston cannot
return to neutral position
because of oil
contamination.
Manual actuation must
not have play, slider
must go into the middle
position by itself
FRONT POWER LIFT /
VENDI
9.1.59 Y019 Spool valve fault Main piston cannot
return to neutral position
when switched on
because of oil
contamination.
FRONT POWER LIFT /
VENDI
9.1.5A Y019 Spool valve fault Main piston deflected
too far
Valve moves into neutral
position
FRONT POWER LIFT /
VENDI
9.1.5B Y019 Spool valve fault Floating position is not
reached
Valve moves into neutral
position
FRONT POWER LIFT /
VENDI
Fault
code
Id code Brief description Description Consequences Link FENDIAS / Note