User Manual

all Vario tractors
Tractor / General system
Vario Tractors - Fault Codes
B
Faults
12/1999
0000 000001
B
f
43/58
Capitel Docu-No.
Index
Date Version
Page
Vario Tractors - Fault Codes
8.3.40 A004 Rear power lift quick lift
switch
Fault in switch /
A004 contact
Raising and lowering
only via external controls
'Electrohydraulic power
lift control' circuit
diagram
REAR EPC ACTUATOR
/ STATUS
CAN (K-Bus) fault
A004 / A005
8.3.41 A004 Rear power lift rapid lift
control
Fault in switch/A004
contact
Rapid lowering system
not functioning
'Electrohydraulic power
lift control' circuit
diagram
REAR EPC ACTUATOR
/ STATUS
CAN (K-Bus) fault
A004 / A005
8.3.42 A004 Rear EPC, hitch function Fault in switch/A004
contact
Hitch function not
operational
'Electrohydraulic power
lift control' circuit
diagram
REAR EPC ACTUATOR
/ STATUS
CAN (K-bus) fault
A004 / A005
8.3.43 A004 Automatic function
(switching from control
console to joystick)
Fault in switch/
A004 contact
Switching not possible 'Electrohydraulic power
lift control' circuit
diagram
REAR EPC ACTUATOR
/ STATUS
CAN fault A004 / A005
8.3.50 B031
draug-
ht
sensin-
g pin
Rear EPC right draught
sensing pin
Draught sensing pin is
overloaded as a result of
twisting lift in upper
range (90-100% lift
height) due to too tight
setting
Fault code will not be
stored
'Electrohydraulic power
lift control' circuit
diagram
EPC-REAR DRAUGHT
SENSING PIN
8.3.51 B032
draug-
ht
sensin-
g pin
Rear EPC left draught
sensing pin
Draught sensing pin is
overloaded as a result of
twisting lift in upper
range (90-100% lift
height) due to too tight
setting
Fault code will not be
stored
'Electrohydraulic power
lift control' circuit
diagram
EPC-REAR DRAUGHT
SENSING PIN
9.1.50 Y019 Spool valve fault Valve cannot be
identified via bus line.
No valve operation
available
Signal flow diagram
A002 CAN II pin 4 and 5
FRONT POWER LIFT /
VENDI
Fault
code
Id code Brief description Description Consequences Link FENDIAS / Note