User Manual

all Vario tractors
Tractor / General system
Vario Tractors - Fault Codes
B
Faults
12/1999
0000 000001
B
f
28/58
Capitel Docu-No.Index
Date Version
Page
Vario Tractors - Fault Codes
4.1.B2 A002 ECU, enhanced control Fault in EPROM
programming (driving
mode selector I / II)
Range cannot be
changed while driving.
EOL reprogramming
necessary
4.1.B3 A002 ECU, enhanced control Fault in EPROM
programming (rapid
reversing ramp
parameters)
Rapid reversing possible
with standard values.
EOL reprogramming
necessary
4.1.B4 B010 Sensor, engine 1 Input parameter values
for plausibility
monitoring are incorrect.
Standard parameters
are stored, plausibility
monitoring system
remains functional.
EOL reprogramming
necessary
4.1.B5 A002 ECU, enhanced control Checksum error ramp
parameter, rapid reverse
for Tractor Management
System (TMS)
EOL reprogramming
necessary
4.1.B6 Equipment 'Neumaier
reverse drive facility'
Neumaier reverse drive
facility has failed or is
faulty
(Neumaier Service
Manual)
4.1.E0 Y004 Turboclutch
characteristic
Wrong characteristic
stored
Continuation in
emergency mode
possible
EOL reprogramming
necessary
4.1.E1 A002 ECU, enhanced control Pressure regulator
control parameters in
tractive power control
(ML - transmission
adjustment) not
plausible or read
incorrectly
EOL reprogramming
necessary
4.1.E2 A002 ECU, enhanced control Pressure regulator
control parameters in
tractive power control
not plausible (B008 /
B039) or read
incorrectly.
EOL reprogramming
necessary
Fault
code
Id code Brief description Description Consequences Link FENDIAS / Note