User Manual

FENDT 900 Vario COM III Faults
B
OVERALL SYSTEM/TRACTOR
Fault Code Table FENDT 900 Vario – COM III
Service Training
919 .. 1001- 934 .. 1001- 922 .. 1001- 925 .. 1001- 928 .. 1001- 931 .. 1001-
0000 B T000002
Version 3
21/09/2007
49
Crop_this_page
0F.1.26 A050 - ECU, basic control unit Communication problem: no
information from EHL task
(steering angle)
0F.1.27 A038 - ECU, central electrical sys-
tem
Checksum error over address
range for central electrical sys-
tem parameters
0F.1.28 A038 - ECU, central electrical sys-
tem
Error on reading from EEP-
ROM during initialisation
0F.1.29 A039 - MFA, multifunction armrest
Button, hydraulic circuit 3
Faulty button, signal line fault
0F.1.2A A039 - MFA, multifunction armrest
Button, hydraulic circuit 4
Faulty button, signal line fault
0F.1.2B A038 - ECU, central electrical sys-
tem
Function non-operable
0F.1.2C A038 - ECU, central electrical sys-
tem
Valve for left reverse operation
support inoperable
0F.1.2D A038 - ECU, central electrical sys-
tem
Valve for right reverse opera-
tion support inoperable
0F.1.2E M002 - Front wiper motor Warning (end position timed
out)
Wiper tries to restart
0F.1.2F A038 - ECU, central electrical sys-
tem
Initialisation error
0F.1.30 M004 - Rear wiper motor Warning (end position timed
out)
Wiper tries to restart
0F.2.0D A038 - ECU, central electrical sys-
tem
Direction indicator, left trailer
socket faulty
0F.2.0E A038 - ECU, central electrical sys-
tem
Direction indicator, right trailer
socket faulty
Fault
code
DIN brief description Cause Consequences Reference FENDIAS/Note