P/N 041224
® TONE-MASTER OWNERS’ MANUAL INTRODUCTION The Fender Amp Custom Shop is dedicated to creating high quality amplification to serve top artists and discriminating players. The Tone-Master is a unique amplifier with many possibilities. On the surface it is a 100 watt, 2 channel switching “Head” amplifier. Upon further inspection one will notice many features which set it apart from anything offered before. The Tone-Master is a hand-made, point-to-point wired, tube instrument amplifier.
TONE-MASTER CONTROL FUNCTIONS A. INPUTS -The guitar input for the Tone-Master. B. FAT - Adds a 3dB boost in gain to the A CHANNEL, mostly to the low and midrange frequencies. C. VOLUME A - Controls the loudness of CHANNEL A. D. TREBLE - Adjusts the overall brightness in the A CHANNEL. E. BASS - Adjusts the level of low frequencies in the A CHANNEL. F. MID - Adjusts the level of midrange frequencies in the A CHANNEL. G. A/B - Allows front panel selection of CHANNEL A or CHANNEL B.
® I. GAIN - Controls the Gain or overdrive of CHANNEL B. J. TREBLE - Adjusts the overall brightness of CHANNEL B. K. BASS - Adjusts the amount of low frequencies through CHANNEL B. L. MID - Adjusts the amount of midrange frequencies through CHANNEL B. M. VOLUME- Controls the loudness of CHANNEL B. SPECIAL NOTE: This control is best adjusted in conjunction with the rear panel IMPEDANCE switch to enable the amplifier to better achieve the cranked-up sound at a lower volume.
CAUTION: TO REDUCE THE RISK OF FIRE, REPLACE FUSE WITH SAME TYPE AND RATING 360W AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR ATTENTION: SUPERFICIE DE CHASSIS CHAUDE CAUTION: CHASSIS SURFACE HOT WARNING: TO REDUCE THE RISK IMPEDANCE Ω LO MED HI OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE ATTENTION: FUSE T4A 250V UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE ET CALIBRE CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN PARALLEL SPEAKER JACKS 100W 4Ω min.
F. EXTERNAL SPEAKER - Plug in connection for an external speaker. This jack must only be used in conjunction with the main SPEAKER JACK. If the EXTERNAL SPEAKER JACK is used without a cord plugged into the main SPEAKER JACK, there will be no sound. G. FOOTSWITCH JACK - Plug in connection for the footswitch. The footswitch allows remote switching from CHANNEL A to CHANNEL B. The footswitch will override the front panel A/B switch. H.
TONE-MASTER SPECIFICATIONS PART NUMBER: 081-2000-000 (120V) 081-2030-000 (240V Australia) 081-2040-000 (230 UK) 081-2050-000 (230V) 081-2070-000 (100V) COMPANION ENCLOSURESWith 4 12” Celestion® “Vintage 30” speakers- 081-3001-000 With 2-12” Celestion “Classic Lead“ (G-12-80) speakers- 081-3000-000 With 2-12” Celestion “Vintage 30” speakers- 081-3003-000 POWER OUTPUT: 100 Watts R.M.S.
