THE SOUND THAT CREATES LEGENDS Bronco Amp , Owner s Manual TYPE: PR 258 P/N 047277
Bronco Owner’s Manual The Fender BRONCO amplifier is a unique combination of radical new distortion sounds and time tested Classic Fender sounds, packaged together in a solid-state configuration which is both easy to use and inherently reliable. based on a radically underdamped design that interacts with the speaker in much the same way as a tube amplifier does, producing sparkle and punch with an increase in apparent loudness and power that defies comparison to other similarly rated units.
Bronco Front Panel Functions 6 7 5 4 3 2 8 12 1 9 4 10 3 11 2 6 7 5 8 12 1 DRIVE SELECT 6 7 5 4 3 2 9 10 11 12 1 NORMAL 8 6 7 5 9 4 10 3 11 2 8 12 1 9 4 10 3 11 2 6 7 5 8 12 1 9 4 10 3 11 2 6 7 5 8 12 1 9 10 11 DRIVE INPUT VOLUME GAIN A B C VOLUME TREBLE MIDDLE BASS E F G H D I A. INPUT — A high impedance, high sensitivity plug-in connection for instruments. H. BASS — Adjusts the amount of boost or cut in the low frequency range. B.
Bronco Specifications PART NUMBER: 120V VERSION: 22-3104 230V VERSION: 22-3164 INPUT IMPEDANCE: Greater than 1 Meg Ohm NOMINAL INPUT LEVEL: 100 mV POWER OUTPUT: 15 Watts R.M.S. RATED LOAD IMPEDANCE: 8 Ohms POWER REQUIREMENTS: 120V VERSION: 120 VAC 60 Hz., .28A Max. 230V VERSION: 230 VAC 50 Hz., .14A Max. SPEAKER COMPLEMENT: One 8 Ohm Special Design 8” Speaker (P/N 025421) DIMENSIONS: Height: 12” Width: 13-1/2” Depth: 7-1/2” (30.5 cm) (34.3 cm) (19.1cm) WEIGHT: 14 lbs. (6.
