THE SOUND THAT CREATES LEGENDS BXR , BASS EXTENDED RANGE One hundred Owner s Manual P/N 040695
BXR 100 Owner’s Manual Congratulations on your purchase of the Fender BXR 100 Bass amplifier. The Fender BXR 100 is the most recent effort in state-of-the-art bass amplifier technology, and is a member of the FENDER BXR series. The design of the BXR 100 was carried out with the aid of some of today's best bass players, and represents years of thought and consideration in determining features and specifications.
BXR 100 Front Panel Functions The front panel contains all items necessary for system operation and observation. Please read this section of the manual carefully to make sure you understand all the operational features for your new FENDER BXR 100 bass amplifier. low-level acoustic pickups to high-output active pickups. Lowlevel pickups generally require a high GAIN setting and low VOLUME setting, while “hotter’ pickups require a lower GAIN setting and a higher VOLUME setting.
J. K. L.. VOLUME control - adjusts the level of the signal coming out of the pre-amplifier section. This control is used in conjunction with the GAIN control to set the overall sound level of the amplifier. In order to maximize headroom and minimize noise, instruments with low- level pickups will require a high GAIN and low VOLUME setting, while other instruments will require a lower GAIN and higher VOLUME setting.
BXR 100 Rear Panel NOTE: DO NOT BLOCK THE AIR FLOW TO THE REAR PANEL, FOR EXAMPLE, BY BACKING THE AMPLIFIER UP AGAINST A WALL. The rear panel is used to keep the output devices from getting too hot. Should the amplifier overheat, a thermal switch will shut the amplifier off until the output devices cool. POWER CORD - This amplifier is equipped with a grounding type supply cord to reduce the possibility of shock hazard. Be sure to connect it to a grounded AC receptacle.
BXR 100 Specifications Part Number: 120V Version: 230V Version: Type Specification: PR 233 Power Requirements: 120V Version: 230V Version: 22-4401 22-4461 120VAC, 60 Hz, 2.4 A Max. 230VAC, 50 Hz, 1.25 A Max. POWER AMPLIFIER SECTION: Power output: 100 watts R.M.S. Rated load impedance: 8 Ohms Distortion at 100 watts: Less than .1% @ 1kHz, below compression; less than 1% @ 1kHz, maximum compression. Sensitivity: 1.03 volts R.M.S.
BXR 100 Block Diagram A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP.
