OWNER’S MANUAL MANUAL DE INSTRUCCIONES MODE D’EMPLOI MANUAL DO PROPRIETÁRIO
PASSPORT® EVENT SERIES 2 Congratulations on purchasing a Fender® Passport Event Series 2 audio system—a self-contained portable audio system designed for great sound anywhere. Carry Passport like a suitcase, and simply flip open the cabinet-release latches to access two full-range speaker cabinets, a powered mixer, and power and speaker cables. quick and easy setup, its ability to cover large audiences and its simple operation are the hallmarks of this innovative product.
6. INITIAL VOLUME/REVERB: Turn MASTER VOLUME knob, all channel VOLUME knobs and all REVERB knobs fully counterclockwise to start: 7. POWER UP: Turn on all external equipment connected to Passport first, then turn Passport on. Power LED will illuminate green: 8. SETTING MASTER VOLUME: Turn MASTER VOLUME up to 1/4 volume: 9. SETTING LEVELS: Connect a microphone or other sound source and slowly turn up that channel's VOLUME control (curved yellow arrow).
FRONT PANEL A. MASTER VOLUME: Adjusts overall loudness. No sound is produced at full counterclockwise position. B. SIGNAL LEVEL METERS: Indicate left/right power amp output signal level. If meters illuminate red, reduce MASTER VOLUME (A) to prevent distortion and avoid amp overload/shutdown (see item R, POWER/PROTECT LED, to reset unit after protect-mode shutdown). ENGLISH C. SIGNAL/CLIP LED: Illuminates green when signal is present; yellow when signal level is -10dB away from clipping.
REAR PANEL S. VOLTAGE SELECTOR: Change the setting of this 100V/120V–220V/240V switch only when using Passport in a country that requires a different voltage setting. T. POWER: Turns Passport on and off. U. POWER CORD SOCKET/FUSE: Connect power cord (included) to this socket; plug other end into a grounded AC outlet in accordance with correct VOLTAGE SELECTOR (S) setting.
