JAZZ BASS Your new Fender Instrument incorporates the highest standards of craftsmanship and quality components. As a Fender Owner you can be proud and self-assured in the knowledge that you have the finest. Your playing pleasure will be enhanced if you become thoroughly acquainted with all of the features of your instrument. Please read this instruction manual carefully and completely. If you need more information contact your Fender Dealer. Copyright @ 1980 CBS Musical Instruments A Division of CBS inc.
Modern styled head Places keys all on one side for easier tuning. Provides straight pull on all strings. Safety string posts and professional plated machine heads. Body Design e Cutaway body for easy access to all frets. e Off set waist for comfortable playing when seated (A Fender Patent). e Back is contoured to fit player's body.
STRING HEIGHT ADJUSTMENT First remove the chrome bridge cover. There are four bridge sections each with two height adjusting screws. To raise the strings turn the screws clockwise. To lower the strings turn the screws counterclockwise. Low string action makes for easier playing but if the strings are too low they will buzz on the frets. HEIGHT \ ADJUSTMENT SCREW sealer f it — LENGTH HOED ® 315 ADJUSTMENT SCREW FIGURE 2 BRIDGE STRING LENGTH ADJUSTMENT There are four length adjusting screws (Fig. 2).
f *, ADJUSTABLE NECK TRUSS ROD: A well known feature of all Fender Electric Guitars is the adjustable neck truss rod which maintains perfect neck alignment. An additional “Fender First” has now been added with the incorporation of a Bullet Truss Rod Adjusting Nut. This nut is located on the head of the instrument at the upper end of the fret board.
ACCESSORIES FOR YOUR FENDER GUITAR F-90 BRIGHT SET Mo, FENDER ELECTRIC STRINGS They finger beautifully with consistent tonal quality and long life expectancy. Plus they are designed to match perfectly with Fender Guitars and Basses. STUDIO BASS AMPLIFIER 200 watts RMS and 440 watts peak music power Five band harmonic balance and equalization inch heavy duty elector voice speaker Thieve aligned vented enclosure.
s BASEMAN 70 70 watts RMS and 154 watts peak music power. Two mounted in a specially designed enclosure. BASEMAN 135 135 watt RMS and 297 watts peak music power. Two heavy-duty 15" speakers housed in an enclosure.
IMPORTANT See accompanying warranty card folder Made in U.S.A. P.0. BOX 4137 1300 E.
