Installation Guide

! PAGE

INSTALLATION

INSTRUCTIONS

Step 8: If a low bottom rail prevents a Full piece of

Fence Armor, we recommend our Demi Fence Armor.

Or you can use shears or cutter to trim Fence Armor

to suit your size needs.

Step 11: Cut Fence Armor down the centre

to achieve a 90 degree corner. Again, do

not forget to round the corners.

Step 9: For your protection, always re-

member to round the corners. Using a

ﬁles will also help in this.

Step 10: Also useful for inside corner in-

stallation.

Step 12: To fasten, pre-drill a 1/8inch hole

in an accessible location, & fasten as de-

scribed in steps 4 or 5.

Step 7: If a larger vertical area of protec-

tion is required, Fence Armor can be

stacked until desired height is attained.