Use and Care Manual
Assembly Instruction
Step 2:
Press the Casters (6) into the holes
at the end of each Base Leg. And
then insert the Gas Lift (5) to the
base.
1
2
(10)×2
Step 1:
Turn the Base (7) upside down,
and then insert the Legs (8) one
by one into the Base.
Next, screw ten Bolts (10) into
the pre-drilled holes with the
Wrench (13) to attach the base
and the legs.
(8)
(7)
(5)
(6)