Installation Guide

ManualsBrandsFELYL ManualsAlcove Shower DoorsBath Door 48 in.W x 72 in.H Frame Shower Door in Black Matte Aluminium with Clear and Tempered Glass

Table Of Contents

Summary of content (17 pages)

PAGE 1
FELL Amo? S N wore d OOr Shower Door Instruction Guide Left Hand Install Right Hand Install Customer Support: 1-877-897-1222 After-sale service: Hours of Operation: M-F 9
PAGE 2
PAGE 3
Check all parts according to the list before assembly . Feel free to contact with us if you need assistance .
PAGE 4
Left Hand Assembly Right Hand Assembly STEP 1 STEP 1 1. Assemble left-side track cap(13) to shower door track(14). 1.Assemble right-side track cap(13) to shower door 2. Assemble wall bracket(7) to fixed panel(9) and insert track(14). fixed panel to shower door track(14), secure wall bracket(7) 2.
PAGE 5
Left Hand Assembly Right Hand Assembly STEP 2 STEP 2 1. Assemble right-side track cap(17) to shower door track(14). 1.Assemble left-side track cap(17) to shower door track(14). 2. Secure wide wall bracket(19) to shower door track(14) with 2.
PAGE 6
Left Hand Assembly STEP 3 1. Assemble left-side track cap(13) and right-side track cap(17) to ends of shower door track(14). 2. Insert shower door track(14) to Fixed panel(9), lock shower door track(14) to wall bracket(7) and wide wall bracket(19) by using self-tapping screws } 7 Left Hand Assembly STEP 3 1.Assemble left-side track cap(17) and right-side track cap(13) to ends of shower door track(14). 2.2.
PAGE 7
Left Hand Assembly STEP 4 1. Hold wall-mounted bracket(6) against wall, level it vertical with level and mark hold potions with pencil. 2. Take off wall-mounted bracket(6) and drill holes on markings. 3. Hammer wall anchors into holes. 21/4" Left Hand Assembly STEP 4 1. Hold wall-mounted bracket(6) against wall, level it vertical with level and mark hold potions with pencil. 2. Take off wall-mounted bracket(6) and drill holes on markings. 3. Hammer wall anchors into holes.
PAGE 8
PAGE 9
Left Hand Assembly STEP 6 1.Move the Movable door(16) inside of shower area. 2.Insert Wall-mounted wall bracket (7) and Wide wall bract (19). 3.Put the assembled shower door in the middle of the two walls. 4. Secure Wall-mounted bracket) use Self-tapping screw Left Hand Assembly STEP 6 1.Move the Movable door(16) inside of shower area. 2.Insert Wall-mounted wall bracket (7) and Wide wall bract (19). 3.Put the assembled shower door in the middle of the two walls. 4.
PAGE 10
Left Hand Assembly Left Hand Assembly STEP 7 STEP 7 1. Drill the hole one Wall use @1/8" drill bit. 1. Drill the hole one Wall use @1/8" drill bit. 2. Secure wall-mounted bracket(6) and wall bracket(7) &(19) 2. Secure wall-mounted bracket(6) and wall bracket(7) &(19) together with self-tapping screw and washer(3), together with self-tapping screw and washer(3), then cover with screw caps(1). then cover with screw caps(1).
PAGE 11
PAGE 12
Left Hand Assembly STEP 9 1. Install movable door with roller assembled onto shower door track(14), make sure rollers are fit in the slots of both shower door tracks(14). Left Hand Assembly STEP 9 1. Install movable door with roller assembled onto shower door track(14), make sure rollers are fit in the slots of both shower door tracks(14).
PAGE 13
PAGE 14
Left Hand Assembly Left Hand Assembly STEP 11 STEP 11 1. Put water retaining gasket(11) on the fixed panel(9) and 1. Put water retaining gasket(11) on the fixed panel(9) and movable door(16), and install magnetic strip(23) on the movable door(16), and install magnetic strip(23) on the movable door(16). movable door(16).
PAGE 15
Left Hand Assembly STEP 12 1. Try sliding the doors and make sure the doors move stably and little gap between magnetic trips(23) with wide wall bracket(19), adjust the top roller assembly(24) if otherwise. How to adjust the top rollers: adjust the bottom screw of the roller, slide the doors at the same time and check the gap between the magnetic trips until it's alright. ANY Left Hand Assembly STEP 12 1.
PAGE 16
Left Hand Assembly Left Hand Assembly STEP 13 STEP 13 1. Install left wall bracket cover(25) on to wall bracket(7). 1. Install right wall bracket cover(25) on to wall bracket(7). 2. Fit insert piece(21) into magnetic strip slot of wide wall 2. Fit insert piece(21) into magnetic strip slot of wide wall bracket(19) first and then assemble right-side cover for wide bracket(19) first and then assemble right-side cover for wide wall bracket(22) onto wide wall bracket(19).
PAGE 17
Left Hand Assembly STEP 14 1. Apply qualified mildew resistant silicone along the sides of wall-mounted bracket(6) and shower door track(14). Allow the silicone to dry for 24 hours before using the shower. Left Hand Assembly STEP 14 1. Apply qualified mildew resistant silicone along the sides of wall-mounted bracket(6) and shower door track(14). Allow the silicone to dry for 24 hours before using the shower.