Operation Manual

a. If not done yet, press-fit the Seatpost Seals into the VR

Seatpost Slot. (fig. a)

b. Apply a thin coat of carbon friction paste on the surface

of Seatpost to insertion point and inside seat tube to prevent

slipping or noise. (fig. a)

Step 2 c. Insert seatpost into frame, thread seatpost binder bolts, but

do not tighten completly. (fig. b)

d. After determining appropriate seatpost insertion, trim

silicone slot cover so exposed seatpost slot is entirely covered

by slot cover. (fig. b)

e. After making sure slot cover is entirely covered, tighten

seatpost binder bolts to 7Nm.

fig. a

fig. b

Seatpost Assembly

-80-