Operation Manual
28
At rst, practice shifting where there are no obstacles, hazards or other trafc,
until you’ve built up your condence. Learn to anticipate the need to shift, and
shift to a lower gear before the hill gets too steep. If you have difculties with
shifting, the problem could be mechanical adjustment. See your dealer for help.
c. What if it won’t shift gears?
If moving the shift control one click repeatedly fails to result in a smooth shift to
the next gear chances are that the mechanism is out of adjustment. Take the bike
to your dealer to have it adjusted.
E. Pedals
1. Toe Overlap is when your toe can touch the front wheel when you turn the
handlebars to steer while a pedal is in the forwardmost position. This is common
on small-framed bicycles, and is avoided by keeping the inside pedal up and the
outside pedal down when making sharp turns. On any bicycle, this technique will
also prevent the inside pedal from striking the ground in a turn.
NOTE: Changing tire size or pedal crank arm length affects toe overlap.
WARNING: Toe Overlap could cause you to lose control and fall. Ask
your dealer to help you determine if the combination of frame size,
crank arm length, pedal design and shoes you will use results in
pedal overlap. Whether you have overlap or not, you must keep the inside
pedal up and the outside pedal down when making sharp turns.
2. Some bicycles come equipped with pedals that have sharp and potentially
dangerous surfaces. These surfaces are designed to add safety by increasing
grip between the rider’s shoe and the pedal. If your bicycle has this type of high-
performance pedal, you must take extra care to avoid serious injury from the
pedals’ sharp surfaces. Based on your riding style or skill level, you may prefer
a less aggressive pedal design, or chose to ride with shin pads. Your dealer can
show you a number of options and make suitable recommendations.
3. Toeclips and straps are a means to keep feet correctly positioned and
engaged with the pedals. The toeclip positions the ball of the foot over the pedal
spindle, which gives maximum pedaling power. The toe strap, when tightened,
keeps the foot engaged throughout the rotation cycle of the pedal. While toeclips
and straps give some benet with any kind of shoe, they work most effectively
with cycling shoes designed for use with toeclips. Your dealer can explain how
toeclips and straps work. Shoes with deep treaded soles or welts which might
make it more difcult for you to insert or remove your foot should not be used
with toeclips and straps.
WARNING: Getting into and out of pedals with toeclips and straps
requires skill which can only be acquired with practice. Until it
becomesareexaction,thetechniquerequiresconcentrationwhich
can distract your attention and cause you to lose control and fall. Practice
the use of toeclips and straps where there are no obstacles, hazards or
trafc.Keepthestrapsloose,anddon’ttightenthemuntilyourtechnique