Operation Manual

14
adjustment unlike most other seatposts. To learn more please refer to the
instruction manual included in the box with your bicycle or visit:
http://www.feltbicycles.com
3. Saddle angle adjustment. Most people prefer a horizontal saddle; but some
riders like the saddle nose angled up or down just a little. Your dealer can adjust
saddle angle or teach you how to do it. If you choose to make your own saddle
angle adjustment and you have a single bolt saddle clamp on your seat post, it
is critical that you loosen the clamp bolt sufciently to allow any serrations on the
mechanism to disengage before changing the saddle’s angle, and then that the
serrations fully re-engage before you tighten the clamp bolt to the recommended
torque (Appendix D or the manufacturer’s instructions).
WARNING: When making saddle angle adjustments with a single bolt
saddle clamp, always check to make sure that the serrations on the
mating surfaces of the clamp are not worn. Worn serrations on the
clamp can allow the saddle to move, causing you to lose control and fall.
Always tighten fasteners to the correct torque. Bolts that are too tight
can stretch and deform. Bolts that are too loose can move and fatigue.
Either mistake can lead to a sudden failure of the bolt, causing you to lose
control and fall.
Note: If your bicycle is equipped with a suspension seat post, the
suspension mechanism may require periodic service or maintenance. Ask
your dealer for recommended service intervals for your suspension seat
post.
Small changes in saddle position can have a substantial effect on
performance and comfort. To nd your best saddle position, make only one
adjustment at a time.
WARNING: After any saddle adjustment, be sure that the saddle
adjusting mechanism is properly seated and tightened before riding.
A loose saddle clamp or seat post clamp can cause damage to the
seat post, or can cause you to lose control and
fall. A correctly tightened saddle adjusting
mechanism will allow no saddle movement in
any direction. Periodically check to make sure
that the saddle adjusting mechanism is properly
tightened.
If, in spite of carefully adjusting the saddle height,
tilt and fore-and-aft position, your saddle is still
uncomfortable, you may need a different saddle
design. Saddles, like people, come in many different
shapes, sizes and resilience. Your dealer can help
you select a saddle which, when correctly adjusted
for your body and riding style, will be comfortable.