manual

3
PARTS OF THE SHREDDER
Figure 1
A. Paper entry
B. Basket
C. Auto-start sensor
D. Power disconnect
switch
E. Shredder head
A
B
E
D
Safety
Tab
C
ASSEMBLY
NOTE: This shredder will operate only when used with the
supplied basket. The supplied basket has a built-in safety
feature which prevents the shredder from operating if used with
any other basket or if improperly assembled.
To assemble shredder
This shredder contains sharp edges on the underside of the
shredder head. Use caution when positioning the shredder
head onto the basket..
1. Remove protective corrugated cover on back of shredder
and caution label on top of shredder.
2. Position shredder head over basket as shown in Figure 1.
3. Align slot on front of shredder head with the tab on the
inside front or back of the basket.
4. Lower shredder head onto basket (while maintaining safety
tab/slot alignment).