Operation Manual

8
POWERTRIM LED and LIGHT SYMBOLS
Cut-Control LED touch pad LED array on cutting base Indication Functions Action
Off Off Machine is switched off
Turn PowerTrim on at
power switch and mains
socket
Off On
Power on
a) SafeCut™ Clamp is open
b) SafeCut™ Guard is open
a) Insert item and close
SafeCut™ Clamp
b) Make sure SafeCut™
Guard is closed
Blue On
Ready (SafeCut™ Clamp
closed)
Blue flashing On PowerTrim is Cutting
Short blue flash every 2
seconds
Off Sleep
Press Cut-Control button
to re-activate PowerTrim
Red and Blue flashing On
Error
(e.g. SafeCut™ Clamp or Sa-
feCut™ Guard is open when
cutting is not yet complete)
Check PowerTrim is
switched on properly and
item inside is secured
properly with SafeCut™
Clamp and SafeCut™
Guard closed properly
Red Off Engine is too hot
Turn PowerTrim off and
let engine cool down for
30 minutes
Touch Purple + short beep
Touch Cut-Control LED touch
pad during cutting
To end trimming – when
continuous trimming is
in process
PowerTrim_v2.0_All_Langs.indd 8 12/02/2009 13:59:54