POWERSHRED HD-10Cs ® Please read these instructions before use. Do not discard: keep for future reference.
ENGLISH Model HD-10Cs A. F. KEY B. C. G. D. H. E. I. A. SafeSense® Technology B. See safety instructions below C. Paper entry D. Waste opening E. Mesh basket F. Disconnect power switch 1. OFF 2. ON G. Handle H. SafeSense® override switch Active Place head on basket as shown: Disconnect power switch must be in ON ( I ) position to operate shredder. I. Control Switch and Indicator lights 1. Auto-On (green) O 2. OFF R 3. Reverse 4. Overheat (red) 5.
BASIC SHREDDING OPERATION PAPER/CARD 1 2 3 4 HD -10C s Continuous operation: Up to 5-minute maximum NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 5-minutes will trigger 20-minute cool down period.
POWERSHRED HD-10Cs ® Declaration of Conformity Fellowes Manufacturing Company Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB, England declares that the product Models HD-10Cs conforms with the requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2006/95/EC), the Electromagnetic Compatibility Directive (2004/108/EC), the WEEE directive (2002/96/EC), and below harmonized European EN Standards: Safety: EN 60950-1 EMC Standard: EN55014-
