POWERSHRED H-6C ® Please read these instructions before use. Do not discard: keep for future reference.
ENGLISH Model H-6C A. B. C. F. G. D. E. KEY A. Shredder head B. Paper/card entry C. See safety instructions below D. Bin E. Window F. Safety lock G. Control switch and LEDs 1. Reverse 2. Off 3. Auto-On (green) 4. Overheat (red) To set lock slide button down For safety reasons, shredder will operate only if the shredder head is in correct position and used with supplied basket.
BASIC SHREDDING OPERATION PAPER/CARD 1 2 3 Continuous operation: Up to 3-minute maximum Feed paper/card straight into paper entry and release Plug in and set to Auto-On ( ) NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 3-minutes will trigger 30-minute cool down period. When finished shredding, set to Off ( ) Safety Lock prevents accidental operation. To set, wait for shredding to stop, set control switch to Off (O) position, then slide black button down.
POWERSHRED H-6C ® Declaration of Conformity Fellowes Manufacturing Company Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB, England declares that the product Model H-6C conforms with the requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2006/95/EC), the Electromagnetic Compatibility Directive (2004/108/EC), the WEEE directive (2002/96/EC), and below harmonized European EN Standards.
