POWERSHRED 99Ci ® Please read these instructions before use. Do not discard: keep for future reference.
ENGLISH G. A. B. C. D. Model 99Ci H. KEY E. A. SafeSense® Technology B. Paper entry C. See safety instructions D. CD/Card safety flap E. Pullout bin F. Casters G. Disconnect power switch 1. OFF 2. ON F. H. Control Panel and LEDs 1. Overheat (red) 2. Bin open (red) 3. Bin full (red) 4. Remove Paper (red) 5. SafeSense® indicator (yellow) 6. Sheet capacity indicator 7. Auto (blue) 8. Reverse 9. ON/OFF (blue) 10.
BASIC SHREDDING OPERATION PAPER OR CD/CARD 1 Continuous operation: 25-minute maximum NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 25-minutes will trigger 40-minute cool down period. 2 3 4 Plug in and put disconnect power switch in ON (I) position 5 6 17 17 or Feed paper straight into paper entry and release Press ( ) ON to activate (blue) 17 To shred CDs or credit cards rotate safety flap into place Hold card/CD at edge.
ENGLISH Model 99Ci PRODUCT MAINTENANCE OILING SHREDDER Cleaning Auto-Start Infrared Sensors All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin. Paper detection sensors are designed for maintenance free operation.
LIMITED PRODUCT WARRANTY Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of defects in material and workmanship and provides service and support for 2 years from the date of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free from defects in material and workmanship for the lifetime of the shredder.
POWERSHRED 99Ci ® Questions or Concerns? www.fellowes.com Troubleshooting Registration Manuals ©2011 Fellowes, Inc. Part No.
