POWERSHRED 385Ci/385i TM Please read these instructions before use. Do not discard: keep for future reference.
ENGLISH Models 385Ci/385i F. G. A. B. C. L. D. E. AUTO H. KEY A. SafeSense® Technology B. Paper entry C. CD, credit card and junk mail entry D. Door E. Casters F. See safety instructions G. Disconnect power switch 1. OFF 2. ON H. Oil reservoir 385Ci only I. Oil drain plug (inside) 385Ci only J. Basket I. K. K. Accessory tray L. Control panel 1. Sheet capacity indicator 2. Low oil indicator (red) 385Ci only 3. Bin full (red) 4. SafeSense® (yellow) 5.
BASIC SHREDDING OPERATION 3 4 i C 5 8 -4 C 2 1 5 i C 5 8 -4 C or AUTO AUTO Plug in and put disconnect power switch in ON (I) position Feed paper into paper entry and release Press ( ) ON/OFF to activate (blue) Set to Off ( ) or shredder will automatically go into sleep mode after 2 minutes of inactivity Feed CD, credit card or junk mail into designated entry and release Advanced product features Jam Proof System Eliminates paper jams and powers through tough jobs.
ENGLISH Models 385Ci/385i Advanced product features ENERGY SAVINGS SYSTEM SAFESENSE® TECHNOLOGY Optimal energy efficiency 100% of the time – in use and out of use. Stops shredding immediately when hands touch the paper opening. • Saves energy in four ways: energy-efficient electronics, jam prevention, standby mode and sleep mode. • Sleep Mode shuts down shredder after 2 minutes of inactivity.
PREVENTIVE MAINTENANCE & ACCESSORIES TROUBLESHOOTING Low Oil Indictor: When illuminated, the shredder is out of oil and needs to be refilled. See the Product Maintenance section for refill instructions. For optimum performance, use Fellowes oil (35250). *Auto Oil™ is only featured on cross cut model – 385Ci. Bin Full Indicator: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 36055.
POWERSHRED 385Ci/385i TM Declaration of Conformity Fellowes Manufacturing Company Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB, England declares that the product Models 385Ci and 385i conform with the requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2006/95/EC), the Electromagnetic Compatibility Directive (2004/108/EC), the WEEE directive (2002/96/EC), and below harmonized European EN Standards: Safety: EN 60950-1 EMC Standard
