® Operating Instructions A Operating Instructions B Operating Instructions C Model: PC 200
Equipment Parts Using the Punching Machine 1. Punching Handle 2. Sheet Supporter/Adjustable Coil Guide Selector 3. Adjustable Paper Margin Guide 4. Punching Area 5. Waste Paper Drawer 6. Binding Tray 7. Margin Depth Selector 8. Left Side Cover 9. Punching Handle Cover Adjusting the Punch Holes should always be centered between the top and bottom of paper edge. To center hole, set the adjustable margin guide. For optimum results, first use several “practice sheets” to set up margin guide position.
Punching Emptying Paper Clippings Insert all sheets into the punching area. Lower the handle to punch holes in paper. Return handle to its original vertical position and remove sheets. Repeat until all sheets and covers have been punched. Note: a maximum 20 To remove, simply pull the waste paper drawer out. Its oversized design means emptying less frequently. sheets can be punched at a time. Binding the Document 1. Align holes. Place punched documents on binding tray.
U.S. Australia Benelux Canada France Germany Japan U.K. ® 1789 Norwood Avenue, Itasca, Illinois 60143-1095 630-893-1600 Customer Service 1-800-945-4545 http://www.fellowes.com Australia Benelux Tullamarine, Vic Vianen, NL Part No. 1-800-955-0959 + 6139-330-3211 (inside Melbourne) 1-800-331-177 (outside Melbourne) + 31-3473-77988 1-800-665-4339 + 334-789-12279 + 4951-31-49770 + 81-3-5496-2401 + 44-1302-885331 Canada Markham, Ont. France Rennes, I-V Germany Garbsen, Han.
