Operation Manual

4
TECHNICAL DATA
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at hand to
use when carrying out maintenance on the indicated parts.
If the tool is used with care and normal maintenance is carried
out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
IDENTIFICATION (Seegures)
A. Logotype plate
B. Data plate
C. Principal handgrip
D. Switch
E. Supplementary handgrip
F. Adjustable angle base
H. R.p.m. regulator
I. Protective screen
L. Regulation side rod
M. Switch lock push button
N. Oscillating regulation
STANDARD EQUIPMENT
3 saw blade package, Anti-chip screen, Anti-shavings device,
Suction unit pipe union, Hexagonal spanner, Regulation side
rod.
APPLICATIONS
The machine is supplied ready for use, the only operation
necessary is the insertion of the blade into the correct
position.
During cutting operations, make sure that the base is always
resting on the work piece.
In order to obtain top quality cutting and optimal performance,
both the amplitude hunt and advancement must be precisely
regulated, depending on the type of material that is being
used (for example: “0” amplitude hunt and slow advancement
shouldbeadoptedforsawingmetal).
When cutting metals it is advised to spread a few drops of oil
on the cutting line.
Sheets should always be rested on sufciently stable
supports (chip-board or plywood tables). In this manner
dragging is avoided and the elasticity of the material is
compensated for.
During use, make sure that the power supply cable does
not impede working operations or come into contact with the
tool.
Small work pieces should be securely clamped in order
that they remain in position during working operations (for
example:xinpositionwithaclamp).
SAFETY STANDARDS
The tool has been designed and constructed to permit
operation in all situations and in absolute safety. In particular
working conditions remember to use protective gloves and
safety goggles. The tool has been designed and constructed
toreducenoisetominimumlevels.(Seetechnicaldata).In
particular working conditions the maximum sound level at the
place of work may exceed
85dBA.In this casethe operatormust use earprotectors.
Work carefully and maintain the tool in perfect working order,
for your own safety.
SWITCH
The switch tted on the saw prevents accidental machine
starting. However, a locking position has also been
provided.
PROTECTIVE SCREENS
Your saw is supplied with a transparent anti-chip screen and
withananti-shavingsdevice.Bothofthesedevicesmustbe
used during working operations.
GUIDE
The saw is supplied with a side guide in order to carry out
parallel cuts.
OSCILLATION
An oscillatory movement of blade can be obtained, permitting
safe and efcient work to be carried out on any type of
material.
ACCESSORIES
Saw blades, Suction unit, Kit for Suction unit, Side guide.
GENERAL SAFETY STANDARD
See attached information: General safety standards.
This booklet forms an integrative part of this manual.
PACKAGING
This tool is sold complete with accessories and the user’s
manual,containedinacardboardbox(orinametalcase)
of suitable size and thickness for the work that the tool is
CHARACTERISTICS JSF65/550E JSF85/600E JSF100/700E JSF120/750E
Cuttingcapacity:(mm)
Wood
Light alloy
Steel
65
12
6
85
15
8
100
20
10
120
20
10
Inclined cuts up to
45
° 45° 45° 45°
Voltage and current 230V/2,4A 230V/2,6A 230V/3,0A 230V/3,1A
Frequency(Hz)
50-60 50-60 50-60 50-60
Absorbed power, W
550 600 705 720
Strokes per minute 200-2800 500-3000 700-3000 500-3000
Weight(Kg) 2,1 2,5 3,0 2,6