User Guide

17
12. Protection mechanism
State Status
Battery is too low Gimbal power o󽗈 after alarm sound
Temperature is too high
Gimbal enter standby mode after alarm
sound, and send message to App
Power on gimbal without load
Overload
Software con󽗊ict
Gimbal power o󽗈 after alarm sound, and send
message to App
Remove smartphone after
powered on gimbal
Gimbal enter standby mode with green
breathing light, and after leaving gimbal in
standby mode for 10 minutes, it will auto
power o󽗈
Power on gimbal when lie it
down
Others
Gimbal power o󽗈 after alarm sound, and send
message to App
13. Gimbal Initialization
Initialization the gimbal when:
(1) The camera is not in level.
(2) Not use for a long period of time.
(3) The ambient temperature changes abruptly.
Method:
Method 1:
Initialize via App (Reset gimbal parameters).
Method 2:
Press album button and mode button together for 1 second;
Please refer to the form in
chapter 11.1 in P16 to check the indicator status.
Note: if the initialization is unsuccessful for a long time, please restart the
gimbal and retry.