Installation Manual

Guilin Feiyu Technology Incorporated Company
For more information, please visit our official website
E-mail: [e-mail] Tel: [phone]
www.feiyu-tech.com
Due to software and hardware improvements, your actual product might differ from the descriptions
and pictures in this user manual. You can get the latest user manual from the official website.
EN V 2.0
3-Axis Stabilized Handheld Gimbal for Camera
Quick Start Guide
Disclaimer
Thanks for using FeiyuTech product. The information in this document affects your safety and your legal
rights and responsibilities. Read the entire document carefully to ensure proper configuration before use,
Failure to read and follow instructions and warnings in this document may result in serious injury to
yourself or others, or damage to your products or damage to other objects in the vicinity.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that
you understand and agree to abide by the terms and conditions herein. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and
regulations, and all terms, precautions, practices, policies and guideline FeiyuTech has made and may
make available. FeiyuTech accepts no liability for damage, injury or any legal responsibility incurred
directly or indirectly from the use of product.
FeiyuTech will not provide any service for any product obtained from abnormal channels.
Notice
1. Make sure motor spinning is not blocked by external force when the product is power on.
2. The product DO NOT contact water or other liquid if the product is not mark waterproof or splash-proof.
Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid.
3. DO NOT disassembly the product except marked detachable. It need send to FeiyuTech after-sales or
authorized service center to fix it if you accidently disassembly and cause abnormal work. The relevant
costs are borne by user.
4. Prolonged continuous operation may cause the product surface temperature to rise, please operate
carefully.
5. DO NOT drop or strike the product. If the product is abnormal, contact FeiyuTech after-sales support.
Storage and Maintenance
1. Keep the product out of the reach of children and pets.
2. DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product
inside of a vehicle on hot days.
3. Please storage the product in dry environment.
4. DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core.
5. Never use the product when the temperature is too high or too low.
■ Specifications
Max. Tilt Range: 230°
Max. Roll Range: 306°
Max. Pan Range: 360°
Tilt Follow Speed: 2°/s ~ 75°/s
Pan Follow Speed: 3°/s ~ 150°/s
Theoretical Battery Life: 12h
(well-balanced)
Weight: 1078g
Payload Capability: 2200g (well-balanced)
Compatible Cameras*: Canon, SONY, Panasonic and etc.
* Please download the detailed manual for the specific compatible camera
and lens.
■ Download the Feiyu ON App
Scan the QR code to download the app, or search
for "Feiyu ON" in the App Store or Google Play.
* Requires iOS 9.0 or above, Android 6.0 or above.
■ Charging
Please fully charge the battery before power on the gimbal
for the first time.
Open the USB rubber cover. Connect the USB 2.0 AM to USB-C
MALE cable to charge. Quick charge is available.
Pan mode
All Lock mode
All follow mode
Follow mode
■ Touch Screen
Bluetooth
Camera connection
Battery level
USB 2.0 AM to USB-C MALE
iOS Version
Android Version
Facebook
Youtube
Twitter
Instagram
* This product does not include the camera.
1
3
11
13
5
6
2
7
4
8
14
12
15
10
9
Scan the QR code to get the latest user manual
or download it from the official website
https://www.feiyu-tech.com/ak2000c/
■ Overview
1. Arca quick release plate
2. Quick release plate
3. Fixed plate
4. 1/4 inch thread hole
5. Tilt axis
6. Tilt axis position lock
7. Vertical arm lock screw
8. Power button
·Long press: power on/off
·Control the touch screen:
Single tap: lock/unlock screen/
return to homepage
·Double tap: standby mode
(single tap at standby mode:
to wake up the gimbal)
9. USB-C port
10. Function button
·Single tap: switch between
video/photo mode
11. 1/4 inch thread hole
3/8 inch thread hole
12. Touch screen
13. Joystick
14. Mode button
·Single tap: switch between pan mode
& lock mode
·Double tap: follow mode
·Triple tap: all follow mode
15. Shutter button
·Press halfway: focus
·Single tap: photo shooting/video
recording
·Long press for 5 seconds:
auto-burst shot (press again to quit)
16. Sliding arm
17. Sliding arm lock screw
18. Thumb screw
19. Lens holder
20. Pan axis position lock
21. Trigger button
·Press & hold: follow mode
·Double tap: reset
·Triple tap: selfie mode (pan axis
turn 180° to shoot)
22. Cross arm
23. Arca quick release plate safety lock
24. Cross arm lock screw
25. Roll axis
26. Roll axis position lock
27. Quick release plate safety lock
28. Vertical arm
29. Pan axis
30. Handle (built in battery)
23
29
19
20
30
28
27
25
26
18
16
17
22
21
24
Check before powering on: Gimbal has enough energy, all the position locks have been unlocked ,
safety lock, lock screw have been tightened. Camera is ready to shoot. (The lens cover should be
removed from the camera and the memory card and battery needs to be inserted to the camera
to complete all the connections.)
Long press power button, release the button until it shows LOGO on display.
Step4: Power ON/OFF
■ Quick Experience
Step 1: Unlock and lock
Step 2: Camera installation
①
②
90°
④
③
⑤
⑦
⑥
⑧
⑩
⑨
Step 3: Gimbal balancing (Balanced standard: the camera can stay stably at any angles)
Balance lock status
Stored lock status
(1)Balance tilt axis (2)Balance roll axis
·Turn the camera lens forward.
·Unlock the safety lock(red).
·Loosen the lock screw (red).
·Move the camera to balance.
·Tighten the lock screw after
balanced.
(3)Balance pan axis
·Hold the handle aslant to 15°~20°.
·Loosen the lock screw (red).
·Move the camera to balance.
·Tighten the lock screw after
balanced.
·Turn the camera lens upwards.
·Loosen the lock screw(red).
·Move the camera to balance.
·Tighten the lock screw after
balanced.
(b)
·Turn the camera lens forward.
·Unlock the safety lock(red).
·Move the camera to balance.
·Lock the safety lock after camera
can keep horizontally forward.
FeiyuTech Global Service Center/飞宇科技全球服务中心
Australia and New Zealand
[phone]
Mondy-Friday
10:00-17:00
[e-mail]
(UTC/GMT+10)
Technical Support and Repairment:
United Kingdom
0845 8623088
Mondy-Friday
10:00-17:00
[e-mail]
(UTC/GMT±0)
Technical Support:
Thailand
[phone]
Mondy-Friday
10:00-19:00
[e-mail]
(UTC/GMT+7)
Technical Support:
China/中国
400-990-6118
Mondy-Friday/周一至周五
8:30-12:00 14:00-18:00
[e-mail]
(Only for Mainland China/仅限大陆地区)
America
805-202-6181
Mondy-Friday
9:00-17:00 PST
[e-mail]
(Pacific Standard Time)
Mondy-Friday
9:00-17:00
(UTC/GMT +1)
[phone]
[e-mail]
Repairment:
Germany
Tutorial Videos
■ Official Social Media
(a)
⑥
⑤
③
②
④
①