3-Axis Stabilized Handheld Gimbal for Smartphone Instructions Guilin Feiyu Technology Incorporated Company User Manual EN V1.
Catalogue www.feiyu-tech.com 1. SPG 2 Overview 1 3. Charging 5 2. Quick Start Guide 3 4. Function operation 6 Introduction of Display 6 Modes Joystick - operation Function Button - operation Bluetooth shutter operation Setting Button - operation Swith Smartphone Modes Volume adjustment Setting Button - operation Trigger Button - operation Multifunction Knob - Zooming control / Follow focus / Control 3 Axis App - Download and Connecting 6 7 7 7 8 8 8 8 9 8 10 5.
1.
Introduction of Display and Buttons 1 Display Bluetooth Audio connection App connection Battery Level 3 Power on / Power off Double tap Follow Mode Quadruple tap Five tap Shutter Button Refer to Page 7 4 After the gimbal is connected to the mobile phone through Feiyu ON App, single tap the shutter button to control the phone to take photos, and double tap it to switch between the front and the rear lens of the camera, press and hold to control the video recording.
2. Quick Start Guide 1 Install Battery Remove the bottom cap, insert a 26650 battery and then tighten the cap. Type Battery Capacity 3 26650 5000mAh 2 Put the Smartphone on It’s recommended to remove your smartphone protective case. Place smartphone in holder so that the phone is snug against the back of the holder.
4 Set the horizontal shooting/ vertical shooting of mobile phone Support clockwise / counterclockwise rotation Pull the mobile phone fixture to switch between horizontal and vertical shooting, as shown in below picture: 90° 90° 90° 5 90° Power on / off NOTE (1) Please mount the smartphone before powering on the gimbal. (2) When the battery is low, please charge the gimbal. (3) When not in use, turn off the gimbal and then remove the battery.
3. Charging Charging the Gimbal *Please fully charge the battery before power on the gimbal for the first time. Charging with Micro USB cable as shown below. Micro Port Micro USB Port Micro USB Cable USB Port (Equipped by user) Output: 5V / 2A Charging the Smartphone Use the mobile phone transfer charging cable (self-provided) to charge the mobile phone, and select the corresponding charging adapter cable according to the charging port of the mobile phone.
4. Operation Modes Panning Mode（Default mode） The roll and tilt direction are fixed, and the smartphone moves according to the left-right movements of the user's hand. Follow Mode The roll direction is fixed, and the smartphone moves according to the left-right movements, up-down movements of the user's hand. All Follow Mode The smartphone moves according to the user's hand. Reset Return to panning mode, three axises return to default position. Lock Mode The orientation of the camera is fixed.
Joystick - operation Upward （1）Lens upward （2）Increase the volume Move to left Up （1）Lens move to left Left Right Move to right （1）Lens move to right Joystick Down Downward （1）Lens downward （2）Decrease the volume Function Button - operation Note：Functions in practice may differ from what is described in the manual in hand due to firmware upgrade. Please refer to the latest version of manual which could be found on official website.
Setting Button - operation When SPG 2 is connected to the mobile phone via Feiyu ON App, the setting button can switch the phone shooting mode, and the phone volume can be adjusted after connecting to the phone audio Bluetooth.
Trigger Button - operation Press and hold Fast follow mode Single tap Answer/hang up the phone Double tap Reset Press and hold the trigger button in the panning follow, follow mode to enter the fast follow mode, and then release it to return to the modebefore entering the fast follow mode In any mode, when the voice Bluetooth connection is successful and connected to the headset, single tap the trigger button to answer the phone, and single tap again to hang up.
App - Download and Connecting 1 Download and Install Feiyu ON App Please download Feiyu ON at your smartphone app store or can the QR code below. * Requires iOS 9.0 or later, Android 6.0 or later. iOS Version Android Version Or search and download the "Feiyu ON" App on the following application platform: App Store 2 Google play Connecting Feiyu ON App （1）Turn on the gimbal. （2）On smartphone, enable bluetooth and open Feiyu ON App.
5. Advanced Operation Manual Lock Camera can be manually positioned while in panning mode , follow mode or lock mode. Both the pan axis and tilt axis can be manually set up. Manually move camera to desired position,and hold for half a second. New tilt and/or pan positions are automatically saved. Take the tilt axis setting for example: Auto-rotation Mode The SPG2 gimbal can easily create constant speed movements in the auto-rotation mode.
Firmware Upgrade Upgrade the firmware through the App. (1) Click left corner icon (2) Select upgrade type. (3) Follow the prompts to upgrade the firmware. Firmware Upgrade Firmware Upgrade Latest version:*** Current version:*** Upgrading Please read the following notices CAREFULLY: Please read the following notices CAREFULLY: 3. The motors will be pow off during upgrade progress, this is normal case. 3. The motors will be pow off during upgrade progress, this is normal case. 1.
Vertical Shooting Press and hold the trigger button in the horizontal shooting mode and then single click the function button to switch to the vertical shooting mode. Double click the trigger button to exit the vertical shooting and restore to the horizontal shooting mode.
3 1 4 1 Open the Feiyu ON App, after the connection is successful, click the volume icon at the top right corner of the interface, select “Bluetooth Earphone”, blow or talk to the sound hole of the earphone, and the icon has sound waves, which indicates the reception is OK. Press and hold the shutter button for about 1 second to start video recording. After the video recording is completed, you can play back the video in the album and listen to the audio effects from the earphones.
6. Specifications 116mm 100mm 69mm 95mm 297mm 100mm 181mm 44mm 35mm 50mm Product Name SPG2 3-Axis Stabilized Handheld Gimbal for Smartphone Max. Rolling Range 320° Max. Tilting Range Max. Panning Range Tilting Speed Panning Speed 320° 360° 2°/s ~ 75°/s 3°/s ~ 150°/s Operation Time 14Hours Adaption smart phone IPhone series and Android series (width 54mm~95mm) Weight 440g （ exclude the battery and smart phone） www.feiyu-tech.
Guilin Feiyu Technology Incorporated Company +86(0)773 2320865 Due to software and hardware improvements, your actual product might differ from the descriptions and pictures in this user manual. You can get the latest user manual from the official website. For more information, please visit our official website D I S C L A I M E R Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.
