User Manual

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [e-mail]
Page 46
Connection by ―Option 1‖, RC receiver connect to the PandaⅡ directly ,it need the
RC and RC receiver both must have ―Fail-Safe‖ function .Setting SW2 switch ,when RC
out of control, the SW2 signal will switch to " Return To Launch (RTL)" position.
Data radio communication interrupt Return To Home
Connection by ―Option 2‖,RC receiver connect to Remote Adaptor. The PandaⅡ
will automatically detect radio communication is normal or not, if the communication
interrupt, it will automatic into " Return To Launch (RTL) " mode.But during the certain
circumstance, like long distance flight, you do not want the aircraft return to home when
the communication is interruption. So you can through click on button to
Cancel Auto Return To Home function.
12. First Flight Test
( 1 ) Assume that flight control system and ground control system connection is
complete and right.
( 2 ) Turn on your RC, power on your aircraft and ground control station.
( 3 ) Open our GCS software，choose the right COM，baud rate 19200，Click
on , input file name "test", click on ―Save‖, now you should be able to see the
flight data like attitude, altitude ,voltage ,etc. on our GCS software.
( 4 ) Please check your RC 3-position switch setting is right and effective or not.
First check ―SW2‖,Switch SW2 and make sure you can see the flight mode ―Path NAV‖,
―RTH‖ change on our GCS software. If the SW2 setting is right, please switch ―SW2‖ to
―NULL‖. Now check the ―SW1‖. Switch SW1 and make sure you can see the flight mode
―RC‖, ―RPV‖, ―Aerobatics‖ change on our GCS software.
( 5 ) Switch ―SW2‖ to ―NULL‖ and switch ―SW1‖to ―Manual mode‖. Use your RC