User Manual

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [e-mail]
Page 29
Throttle
Warning: It is recommended that you remove your prop or disable your motor
while performing these setup procedure.
Pleases refer to the throttle output at the servo display as shown to the right.
With your throttle at the lowest setting the number should read 1000. As your throttle
up this number should get larger. If instead the number reads 2000 and gets smaller
as you increase the throttle please select “THR REV”
Rudder (check in "Auto Balance Mode" )
CLOCKWISE rotate your plane , the rudder should move to the Left.
COUNTER CLOCKWISE rotation ,the rudder should move to the Right
If the servo movement is incorrect, you need to reverse the automated servo
movement please select “RUD REV”.
Turn left
Rudder moves to the right
Turn right
Rudder moves to the left