User Manual

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [e-mail]
Page 22
11.4 Connect PandaⅡ To Our GCS Software
When you finish the flight control system installation and power on the whole system.
Please choose the right COM"X"(Like:COM1),baud rate:19200 and click on "Connect"
button, this time will pop-up a ID setting dialog box .Enter the ID number of the PandaⅡ ,
click ―OK‖ button, it will pop-up a dialog box to prompt record the log file, choose the save
path , you can change the file name . Click the ―save‖ button . After the connection is
successful, you can see the data which pass back from PandaⅡ in GCS.
Connection ID number
Firmware of PandaⅡ V1.2 or above version increased the ID number
matching function .Users can set the ID number of the PandaⅡ by oneself , only when