Owner's manual

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [e-mail]
Page 32
pulse is optional (Camera remake pictures please refer to the Appendix J ).
Camera shutter pulse can be select with“Normal” or “Narrow”. Please set up
according to the camera. For the camera which need for a longer camera shutter pulse,
we suggest that select the ‖Normal‖, otherwise it may fail to photograph because the
short shutter pulse; For the camera which need for a shorter camera shutter pulse, we
suggest that select ―Narrow‖, otherwise it may generate not only a photo for each trigger.
 Pulse width of the camera shutter pulse,“Normal”:1S; “Narrow”:0.2S.
 Two modes for selection of auto photograph ：”Timing-PG”,”E-Dis-PG”
 After finish the camera shutter pulse setting, please click the “ Save ” button
in page ” Param1” in the tool bar to save the setting.
14.3 Automatic Take Off
14.3.1 Automatic Take Off Mode Setting
PandaⅡautopilot has two auto take off modes (―Hand Throws‖ and
―Catapult-Assisted‖)for selection and can set up via the GCS software. ―Menu‖ ——
―Autopilot Setting‖ —— ‖Takeoff and Landing Setting‖ then select the needful auto take
off mode. Default mode is ―Hand Throws‖
Difference between “Hand Throws” and “Catapult- Assisted” automatic take off
mode
Catapult-Assisted: When the aircraft‘s motion is detected, the autopilot will control
the airplane with the maximum throttle quantity which set up via the GCS. Otherwise will
adjust 30% of the throttle for idle speed.
Hand Throws: After click on the ―A Takeoff‖ button on the GCS software ,the