Owner manual

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [e-mail]
Page 39
This manual is just a guideline to help you set up your aircraft for autonomous flight.
As each aircraft is unique, you will need to fine tune the settings to suit your aircraft‘s flight
characteristics.
Firmware upgrade
Panda2 contain the basic function of firmware upgrade, you can do the firmware upgrade by
yourself, just need to download the latest firmware from: www.feiyudz.cn
Connection mode is as follows:
Firmware upgrade procedure:
1． Download the latest firmware and firmware upgrade software from our official website.
2． Install and open the firmware upgrade software, choose the right COM number and click on
―Open port‖.
3． Choose the firmware which you need to upgrade.
4． Start to upgrade, wait to upgrade success.
PID parameters instruction and adjust
The PID parameters adjust require you have professional knowledge.
The three values of each parameters from PID control menu correspond:
Proportional, integral, and damping
―Turn Control‖-------Control the angle of roll when the aircraft use aileron navigation.