Owner manual

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [e-mail]
Page 33
Auto take-off setting and debugging
Attack angle: Use this to adjust the Auto take-off pitch setting(default is 25 deg).
Take-off Spd: Ground speed setting during take-off(We suggest you set to 0).
Take Off Throttle：We suggest you set to 90.
Automatic take-off is not suitable for all model aircraft, it's more suitable for hand or
catapult take-off aircraft. We take throwing take off aircraft for example, after set the automatic
take-off parameter, please prepare for throwing take off. Click on . Wait the motor
reach maximize speed, then push the aircraft into the air. Observe the aircraft auto take off or
not, the aircraft auto climb to 50m and into RTL mode. The aircraft will continue climb to 100m
and circling around Home point waiting for your next instructions. During the auto take-off
procedure except the throttle you still can through your RC to manual assistant auto take-off.
Introduction to other functions and Settings