Owner manual
Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn service@feiyu-tech.com
Page 32
15. Alternately, you may use your transmitter trims to level the aircraft in Auto Balance Mode. While
flying in a straight line and having no input through the transmitter sticks.
Please through the to record servo neutral.
16. Target speed setting(Default setting is 60km/h).The flight speed is very important, you can not
optional Settings. The speed must can keep aircraft keep normal flight. We suggest not increase the
settings too high, it may cause very unusual flying behavior and may result in damage of your aircraft
due to excessive throttling. You can through watch the ―GPS speed‖ shows on our GCS software and
assess the flight cruising speed to set the target speed. Through—―Param1‖---
,click on ―set‖. After that, please do not forget to click on
to save the setting to our Panda2.
17. Switch SW2 to Return To Launch (RTL)mode to watch the aircraft automated return to home or
not. Upon reaching the home point it will automatically engage auto circling, while it waits for your
further instructions.
18. After Return To Launch test, please switch SW2 to ―Path Navigation mode‖ to watch the aircraft
according to preset route fly or not.
19. Take off and finish the first flight test.