Owner manual
Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn service@feiyu-tech.com
Page 27
THROTTLE:
1. Warning: It is recommended that you remove your prop or disable your motor while
performing these setup procedure.
2. Pleases refer to the throttle output at the servo display as shown to the right.
3. With your throttle at the lowest setting the number should read 1000. As your throttle
up this number should get larger.
4. If instead the number reads 2000 and gets smaller as you increase the throttle then
check the βTHR REVβ in the βREV rudder settingsβ box: